BS EN ISO 22052 pdf free download

BS EN ISO 22052 pdf free download.Dentistry – Central compressed air source equipment.
3.12
compressor motor set
collection of components including one or more compressor heads (3.11) along with one or more electrical drive motors
3.13
condensate drain
device to drain off condensed water from the air receiver (), water separator, air dryer, air filter (3A)
3.14
dental air
compressed air (3.9) for powering, controlling, and/or assisting various dental instruments and equipment, as well as for assisting practitioners with procedures in the oral cavity, but not for procedures requiring medical air or sterile air, such as endoscopy, oral surgery, analgesia, and life support
[SOURCE: ISO 7494-2:2015, 3.7, modified.]
3.15
dental air outlet
location at central compressed air source equipment (3) where the dental air (3.14) lines or additional devices are connected to central compressed air source equipment
3.16
dental compressor
collection of components used to compress, treat and store air that meets dental air (3.14) specifications for dental procedures
3.17
central compressed air source equipment connection point
location where the central compressed air source equipment (Is) is connected to the main line for dental air (3.25)
3.18
dewpoint
temperature at which water vapour begins to condense
3.19
exhaust air outlet
point where the cooling air exits central compressed air source equipment (i) location room
3.20
fittings
components that are used to connect the dental compressor (3.16), valves and devices with the pipes
3.21
flexible tube
hose or tube which connects the compressor with the central compressed air source equipment (3) or with the connection point to the main line for dental air (3.25) or, if applicable the quick release coupling device
3.22
fresh air inlet
location where central compressed air source equipment (Is) can draw in the atmospheric air from a source, where appropriate located outside the building
3.23
fresh air ventilation
place, where fresh air can enter central compressed air source equipment (i) location for ventilation, cooling and compressing
3.24
intake muffler
device which reduces the noise level caused by the suction action of the compressor
3.25
main line for dental air
components of a piping installation in a dental facility used to transport dental air (3.14) from central compressed air source equipment (1) to the dental treatment room and other rooms with various dental air consuming devices
3.26
oil separator
device that is installed in oil-lubricated central compressed air source equipment (Is) in order to reduce the oil content of the compressed air (3.9)
3.27
central compressed air source equipment location
area outside the dental treatment room in a dental facility where equipment which supplies dental air (3.14) to one or more treatment rooms are installed
3.28
pressure dewpoint
dewpoint (3.18) of the air at the specified pressure
3.29
pressure-regulating valve
device that controls the maximum air pressure delivered to the main line for dental air (3.25)
3.30
quick-release coupling device
device that is installed at the central compressed air source equipment (3m) connection point to disconnect the central compressed air source equipment from the main line for dental air (3.25) for maintenance and measurement of air delivery flow rate (32), air humidity and noise level
3.31
shut-off valve
device that is used for maintenance to isolate central compressed air source equipment (3) from the main line for dental air (3.25) installed between the air receiver (I&) and the dental air outlet (3.15)
3.32
suction tube
component for connecting thefresh air inlet (3.22) with the compressor fresh air inlet.BS EN ISO 22052 pdf download.