BS EN 12199 pdf free download

BS EN 12199 pdf free download. Resilient floor coverings – Specifications for homogeneous and heterogeneous relief rubber floor coverings.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12466, Resilient floor coverings — Vocabulary
EN ISO 105-B02:2014, Textiles — Tests for colourfastness — Part B02: Colourfastness to artificial light:
Xenon arc fading lamp test (ISO 105-B02:2014)
EN ISO 10874, Resilient, textile and laminate floor coverings — Classification (ISO 10874)
EN ISO 23999, Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat (ISO 23999)
EN ISO 24340, Resilient floor coverings — Determination of thickness of layers (ISO 24340)
EN ISO 24341, Resilient and textile floor coverings — Determination of length, width and straightness of sheet (ISO 24341)
EN ISO 24342, Resilient and textile floor coverings — Determination of side length, edge straightness and squareness of tiles (ISO 24342)
EN ISO 24343-1, Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 1: Residual indentation (ISO 24343-1)
EN ISO 24344:2012, Resilient floor coverings — Determination of flexibility and deflection (ISO 24344:2 008)
EN ISO 24346, Resilient floor coverings — Determination of overall thickness (ISO 24346)
ISO 34-1:20 15, Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
ISO 48-4, Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 4649:20 17, Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12466 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: 一- IEC Electropedia: available at http:/ /www.electropedia.org/ ISO Online browsing platform: available at https:/ /www iso.org/obp/ui 3.1 homogeneous rubber floor covering floor covering based on natural or synthetic rubber with one or more layers of the same composition and colour, patterned throughout its thickness 3.2 heterogeneous rubber floor covering floor covering based on natural or synthetic rubber consisting of a wear layer and other compact layers which differ in composition and/or design and can contain a reinforcement 4 General requirements All homogeneous and heterogeneous relief rubber floor coverings shall conform to the appropriate general requirements specified in Table 1, when tested in accordance with the test methods given therein. Optional properties are given in Annex A.5 Classification requirements Homogeneous and heterogeneous relief rubber floor coverings shall be classified in accordance with the requirements for overall thickness and the wear layer thickness specified in Table 2, when tested in accordance with the test methods given therein. 6 Marking The floor coverings described in this document and/or their packaging shall bear the following marking: a) reference to this document, i.e. EN 12199:2020; b) manufacturer’s or supplier s identification; c) product name; d) colour/ pattern, and batch and roll number if applicable; e) class/symbol, as specified in EN ISO 10874; f) the dimensions for tiles; g) the covered area for rolls.BS EN 12199 pdf download.